{huk:LocalizateMediaInline(image:'TYPO3\CMS\Extbase\Domain\Model\FileReference:132678
Point machine for for Flat-Bottom Points
{huk:LocalizateMediaInline(image:'TYPO3\CMS\Extbase\Domain\Model\FileReference:132679
Clear arrangement and easy access to the components
{huk:LocalizateMediaInline(image:'TYPO3\CMS\Extbase\Domain\Model\FileReference:132680
End-position monitoring with clearly visible forced-guided contacts
{huk:LocalizateMediaInline(image:'TYPO3\CMS\Extbase\Domain\Model\FileReference:132681
Optimal visibility of lock function
{huk:LocalizateMediaInline(image:'TYPO3\CMS\Extbase\Domain\Model\FileReference:132694
Point machine H715 at the main station Linz
{huk:LocalizateMediaInline(image:'TYPO3\CMS\Extbase\Domain\Model\FileReference:132695
Point machine H715 installed in the rail network operated by Austrian Federal Railways (ÖBB)
{huk:LocalizateMediaInline(image:'TYPO3\CMS\Extbase\Domain\Model\FileReference:132697
Point machine H715 at Calmbach (AVG) railway station

Point machines of the H715 series

The application range of this innovative setting system stretches from heavy-rail line networks, public transport and freight transportation to industrial and harbour railways. Point machine H715 can be integrated into all kinds of flat-bottom points with various gauges. Point machines in existing point systems can be easily replaced by the H715, which is certified for fulfilment of SIL 4 in compliance with CENELEC EN 50129, as both the mechanical and the electrical interfaces are compatible.

Attributes of the 715 series:

  • Swift change between left and right installation – without retrofitting the hydraulic unit
  • Unique visual check of lock engagement and monitoring elements
  • Open electric interface allows simple adaptation to different control and interlocking requirements
  • Hydraulic drive system provides constant setting force over entire service life
  • Low-maintenance thanks to lubricant-free ball and sliding bearings
  • Top cover opening for manual setting with all available cranks
  • Installation in hollow bearer possible (optional)
  • Protection class IP54 in compliance with EN 60529
  •  

    Technical Data Point Machine H715

    Drive form electro-hydraulic
    Point type flat-bottom
    Setting force up to 9,000 N
    Point opening up to 240 mm
    Operating voltages* 400 V AC
    Temperature range - 33 °C ... + 70 °C
    Protection class IP54 in compliance with EN 60529
    Safety integrity (depending on version) up to SIL 4 in compliance with EN 50129

    *Other operating voltages on request